Customer service hotline: 400-1618-679
Tel: 0516-81915686
Fax: 0516-81915687
Email: xzjndl@163.com
Official website: www.xzjndl.com
Headquarters address: No. 6, Software Park Road, Quanshan District, Xuzhou City, Jiangsu Province
Manufacturing base: No. 2, Fumin Road, High tech Industrial Development Zone, Xuzhou City, Jiangsu Province
Pneumatic propeller
1. Product Introduction
Working principle: Compressed air enters the cylinder through the solenoid valve to transmit its pressure to the piston, and then the piston rod drives the oil gun or ignition gun to hit the rod. At the same time, the stroke switch is used to achieve the reversing action of the solenoid valve, and then the cylinder piston drives the oil gun or ignition gun to complete the forward and backward actions of the oil gun or ignition gun.
Structure: This series of pneumatic thrusters mainly consists of air cylinders, pistons, travel switches, electromagnetic valves, impact rods, push rods, and other components.
Features: Compact structure, good performance, stable operation, low noise, small size, beautiful appearance, fully sealed dustproof structure, convenient installation, operation and maintenance, easy to control operation.
2. Model and Technical Parameters Table
model | route or distance of travel | Action time | Solenoid voltage | Air supply pressure | Travel switch | Installation method |
XTJ-21/□ | 300/400/要求 | 1 s | AC220V | 0.4～0.8Mpa | AC220V 3A | Flange mounting |
XTJ-22/□ | 300/400/要求 | 1 s | AC220V | 0.4～0.8Mpa | AC220V 3A | Base installation |
Note: In the model, □ refers to the forward and backward stroke L (mm) of the propeller.
3. Product structure diagram
